2.0 Pitch 4 Pin Single Row Male Header DIP Straight

JYE is one of 2.0 Pitch 4 Pin Single Row Male Header DIP Straight manufacturer and supplier in China.

summary：

The 2.0mm spacing 4-pin single row direct insertion male connector is a standardized and compact interconnect device. With precise spacing design and stable mechanical performance, it has become the core component for circuit interconnection in electronic devices, widely adapting to the requirements of miniaturization and high-density circuit layout. As an interconnect component that combines miniaturization and reliability, this connector has become the preferred solution in electronic design due to the increasing demand for lightweight and high-density layout of devices.

introduction：

The 2.0mm spacing 4-pin single row direct insertion male connector is a standardized compact interconnect device composed of an insulated housing and metal pins, used for signal and power transmission of circuits and modules in electronic devices. It is adaptable to multiple scenarios with small spacing and stable performance. It is a single row 4-pin layout, with a 2.0mm spacing that saves more PCB space than traditional 2.54mm, making it suitable for device miniaturization; Pin 180 ° direct insertion complies with DIP specifications and requires board soldering. It has high mechanical strength, resistance to vibration and impact, and is easy to weld and repair. Some models come with foolproof and buckle design. The shell is made of UL94 V-0 flame-retardant materials such as PA66, which can withstand high temperatures of 250 ℃; The terminals are made of copper alloy plated with tin or gold, with low contact resistance and oxidation resistance. They can withstand more than 25 insertions and removals, with a single pin pull-out force of ≥ 0.10kgf and a retention force of ≥ 1.2kgf. The electrical rated voltage is 100V-250V AC/DC, the single needle current is 2A-3A, the insulation resistance is ≥ 1000M Ω, the withstand voltage is 500V-800V AC, suitable for medium and low voltage scenarios, and meets environmental standards.

Feature：

2.0mm spacing 4-pin single row direct insertion male connector, using a single row 4-pin layout, 2.0mm spacing (saving PCB space compared to 2.54mm spacing), pins 180 ° direct insertion in accordance with DIP installation specifications, requiring board soldering and fixation; The DIP method has high mechanical strength, resistance to vibration and impact, thick and easy to weld and repair pins, suitable for prototype production and debugging. Some models come with foolproof and buckle design. The shell is made of UL94 V-0 flame-retardant materials such as PA66, which can withstand high welding temperatures of 250 ℃; The terminals are made of copper alloy plated with tin, with stable conductivity and the ability to withstand more than 25 insertions and removals. The single pin pull-out force is ≥ 0.10kgf and the holding force is ≥ 1.2kgf, meeting the full cycle use requirements of the equipment.

Application

The 2.0mm spacing 4-pin single row direct insertion male connector is widely used in the consumer electronics field, commonly used for connecting motherboards and functional modules of mobile phones, smart wearable devices, and small household appliances, to meet the needs of device miniaturization; In industrial automation scenarios, devices such as PLC controllers, temperature or pressure sensors can be connected to adapt to the workshop environment with anti vibration characteristics; In the field of automotive electronics, it is suitable for circuit interconnection of LCD panels and small control modules for in car navigation, and can withstand temperature fluctuations and mechanical vibrations inside the car; It can also be used for portable detection instruments, IoT terminal nodes, and other devices, balancing connection reliability and ease of later debugging and maintenance, meeting the needs of medium and low voltage signal and power transmission.

Electro-Optical Characteristics

Pin spacing: 2.0 millimeters.

Number of pins: 4.

Row number: single row.

Installation method: Direct insertion (DIP).

Shell material: Commonly used are high-temperature resistant engineering plastics such as PA66, which comply with UL94 V-0 flame retardant standards.

Insertion and removal times: generally up to 25 times or more.

Single needle extraction force: not less than 0.10kgf.

Single needle holding force: not less than 1.2kgf.

Rated voltage: usually 100V-250V AC/DC.

Rated current: generally 2A-3A.

Contact resistance: usually ≤ 20m Ω, some models as low as 10m Ω.

Insulation resistance: ≥ 1000M Ω.

Voltage endurance: up to 500V-800V AC.

Working temperature: generally -25 ℃ -+85 ℃, some products can reach -40 ℃ -+105 ℃.

Environmental standards: Compliant with RoHS 2.0, Halogen Free and other environmental standards.

Deliver,Shipping And Serving

1.The fast response of your inquiry.

2.We provide OEM, ODM service, the details of product can be made as your requirement.

3.Strong technical force and excellent sales team to provide all-round service before sales and after sales.

4.Use selected raw materials, reliable quality and competitive price.

5.Over 10 years professional manufacturer experience of assembly connect cable in China.

6.Our factory is lS09001 certified.

7.Complete automatic equipment, high production efficiency and punctual delivery time.

8.Each of our products has been 100% instrumentally-tested to ensure the quality and function.

9.Small orders are available

10.Our products have extensive use and enjoy a wide market all over the world.

11.For the sake of customers, strive to achieve a win-win situation, hope to establish a long-term cooperative relationship.